Typewriter Files: 1959 Royal Futura 800

I don’t remember how long ago this 1959 Royal Futura 800 typewriter came into my possession, but I know it sat in my old room at my parents’ place for about a decade before, in my recent typewriter mania, I eagerly reclaimed it for examination, restoration, and loving use.

As outwardly there wasn’t much wrong with it, the Before shot I took looks quite similar to the After:

royal-futura1

The body is undamaged and mostly quite shiny all the way around. Mechanically it’s sound too, typing smoothly and with no apparent malfunctions. Its insides, however, were filthy: cat hair, dried padding dust, and the detritus of decades had accumulated on its oiled architecture. Initially I was ill-equipped for the thorough clean job it needed, but after a quick trip to Walgreens my supply cache was filled with Q-tips, cotton wiping pads, a compressed air can for spraying out hard-to-reach areas, and a pen light for peering into the innards.

royal-futura2
Pre-cleaning serial number.

Piece by piece I went along and wiped down what I could, making sure not to disturb any of the mechanisms. The very middle section, wedged between the escapement and the carriage, was a tough get. Without taking the whole machine apart — a process I feared that, past a certain point, I wouldn’t be able to recover from — I couldn’t touch every piece that needed cleaning, but with the compressed air can and some swabs I got to damn near everything I could. Since nothing was obstructing the machinations I figured I’d leave good-enough alone.

The most difficult parts to clean were the glue remnants from the padding pieces, on the removable side pieces and inside the ribbon cover (which pops out when you push the red Royal logo in front):

royal-futura5

The aged padding crumbled off at the slightest touch (unfortunately falling into the body), but the hardened glue remained recalcitrant, even after a few rounds of goo remover and scraping. I could have kept at it but wanted to move on, so I just made sure the pieces were otherwise clean.

As this was my first major typewriter clean-up project, I learned a lot. Though each typewriter make and model will present its own challenges, the biggest mistake I made with the Futura will apply to every typewriter I work on. I realized only after it was too late that I didn’t make note of which screws went where. During disassembly I thought “The black ones go here” and “the short silver ones go here”; but a day later, after I’d spent so much time and energy inside the thing, as I was bringing the body pieces together I realized my error. Oh crap, where do these go? Trial and error got me the rest of the way and all systems returned to order eventually, but I was very happy when it finally reconstituted and typed without a hitch.

The low-grade panic I felt did inspire my first lesson: Document. Right after the Futura was restored back to health, I put a bunch of loose leaf paper into a three-ring binder, wrote Royal Futura 800 atop the first page, and took notes on everything I’d done and seen: initial impressions and observations, notable blemishes and potential problem spots, its serial number, and suggestions for further repairs and cleaning. As I’d be moving on to other typewriters, I didn’t want to start mixing up what I did on which machine and which required which maintenance. I’ll do a typeface sample on each of the notes pages, too, so I can compare them at a glance.

royal-futura4

The Futura came with an orange wooden case lined with a golden metal trim, but it was missing its handle, making it a cumbersome carry. Someone in the Typewriter Facebook group mentioned using a belt as a replacement, so I got a thin leather belt (that unfortunately doesn’t match very well, but it was free, so I have that going for me) and wound it around the remaining metal loops. Works great.

Finally, using the Typewriter Database I narrowed down the manufacture date of the machine to 1959, based on its serial number. I then uploaded it as my first gallery on my Typewriter Database page. Still need to add a few more photos and a typeface specimen, but for now I’ll enjoy notching my first typewriter before quickly moving on to the next.

Until next type…

royal-futura3
The Idea Owl approves.

Comments

[…] Royal Futura 800 seemed like a good option. I was considering selling it, but since I got it for free I thought it […]

Reply